No full project neededExternal energy managerDon’t need a full project? We regularly evaluate your consumption and give concrete recommendations that save money. An experienced energy manager is available whenever you need one.No-obligation consultationEmail us
Smart metering and energy
Visibility of consumption. Lower costs. Reliable operation.
You don’t have to pay for energy you don’t actually use. By metering electricity, heat, gas and water in real time, we uncover where losses arise and turn them into measurable savings. From the first analysis to long-term operation.
Consumption overviewLIVE
- Electricity418kW
- Heat1.74GJ/h
- Gas97m³/h
- Water14.0m³/h
Consumption · 24 hillustrative
What you get
You don’t just get numbers. You get decisions.
All utilities monitored around the clock. The system automatically evaluates consumption deviations, night-time leaks and power peaks, and alerts you the moment they occur. The result is not another chart but a decision you can make today.
- Electricity, heat, gas and water in one overview
- Real-time consumption
- Automatic alerts for deviations and peaks
- Clear reports for management and audits
- A solution selected and tailored precisely to your operation
Your operation · nowillustrative
- ElectricityMain switchboard RH1418kW−6.4 %
- HeatHeat exchanger V1 · plant room1.74GJ/h+4.1 %
- GasBoiler room K2 · basement97m³/h−2.8 %
- WaterMain water supply14.0m³/h+38.5 %
Updated every 15 min· Alert on deviation· One-click report
How it works
The journey of one reading
From the meter on site to the decision. Every reading travels the same path, and we take care of all of it as one partner.
01Metering
We fit new meters and connect existing ones, even those with only a pulse output.
02Transmission
Wired or wireless, depending on conditions on site. We bring all the data together into one network.
03Collection and backup
An industrial edge computer collects and aggregates the data on a separate network. A backup power supply keeps collection running during a power cut.
04Platform
The data is archived and displayed in real time. We set up dashboards, alerts and reports.
05Decision
You see a deviation the moment it occurs, and you decide today, not tomorrow.
Services
Choose how much you leave to us
Some want their energy fully taken care of, others prefer to run part of the system themselves. That is why we offer three levels of collaboration, depending on the scope of services you need. Choose the path that suits you best and see its steps.
Each step is also an entry point. Renovation is the last step. It follows from measured data and is never done blindly.
What we install
Look inside the switchboard
This is what metering in a switchboard looks like after our installation. Every component has its job.
Illustrative wiring based on our projects.
A solution for your operation
Every type of operation has different needs and a different savings potential. Choose yours and we will show you a concrete solution.
Industry and manufacturing
Metering down to individual lines and machines.
Case studyHealthcare
Continuous monitoring of critical utilities and reliable operation 24/7.
Case studyPublic sector
Lower operating costs and an accurate overview of energy consumption in every building.
Case studyBuildings and facilities
Accurate sub-metering and fair allocation of costs.
Case studyFAQ
Frequently asked questions
Which energy sources and utilities can you meter?
The basics are electricity, heat, gas and water, in industry and in residential buildings alike. We also measure temperature and humidity, pressure, medical gases and air quality. You then see everything in one overview.
Do we have to replace the meters we already have?
No. We connect your existing meters, even those that only give pulses. We fit new ones only where metering is missing.
How does the data get from the site into the system?
Wired or wireless, depending on conditions on site. An industrial edge computer collects the data on a separate network, and a backup power supply keeps collection running during a power cut.
Will the installation disrupt our operation?
The installation is carried out by our own technicians around the running of your operation. Monitoring at ÚVN Ružomberok, a military hospital, was installed while the hospital was fully operational, and in apartment buildings without restricting residents. After fitting, we check every metering point so the data is accurate from day one.
What will we see once you launch the system?
Consumption in real time, not only on the invoice. We set up overviews, alerts for deviations and peaks, and reports for management and ISO 50001. We train your people.
How much can we save?
Only metering at your site can tell; we make no promises without data. To give you an idea: at Taplast, monitoring revealed savings of €81,000 a year. A short questionnaire or a free initial consultation will show you the first step.
What is the best way to start?
With a free initial consultation or an energy analysis. Most operations start with an analysis or with metering and add the platform only once there is something to display.
Can we manage the system ourselves?
Yes. We build turnkey metering and IoT infrastructure, you run it yourself, and we are on hand for expansion or service. If you want your energy fully taken care of, we measure, evaluate and propose savings for you.
Will you look after the system after launch?
Yes. We regularly evaluate consumption, propose measures and confirm their benefit with real data.
Do you also upgrade the wiring itself?
Yes, through electrical circuit renovation. We design it based on measured data and include smart metering and IoT from the design stage.
Do you also sell the meters on their own?
Yes. We also supply the meters, sensors and components we work with ourselves separately. Tell us what you are looking for and we will help you choose.
Contact
Let’s start where you lose the most
A free initial consultation. Within 30 minutes we know what makes the most sense for you.
No obligation · No hidden fees · We reply within 24 hours
Write to us
office@
For clients and partners
- Mgr. Denis HriňCo-founderhrin@
nidextechnology.com+421 905 134 635 - Ing. Nicolas HečkoCo-founderhecko@
nidextechnology.com+421 904 418 299
Nidex Technology s.r.o.Novozámocká 55/58, 949 05 Nitra, Slovakia
Please call before visiting