---
title: "Networking existing meters · Taplast · reference | Nidex Technology"
url: https://www.nidextechnology.com/en/references/industry/zosietovanie-existujucich-meracov
language: en
---

Reference · Industry and manufacturing

# Networking existing meters

Client

Taplast plastics industry

Project goal

Networking an existing installation

800 m

Communication line length

25

Metering points

28

Devices installed

[Case study · Industry and manufacturing How to save an industrial company €81,000 a year on energy, penalties and power factor Read the case study](https://www.nidextechnology.com/en/references/industry)

How it is connected

## Solution diagram

Simplified diagram based on the project description.

- 01 · Metering Existing meters and new analysers in the transformer station Electricity **25** metering points **28** devices installed
- 02 · Transfer Modbus RS485 RTU, 800 m line · Ethernet **800 m** communication line length
- 03 · Data collection Edge device
- 04 · Network Company network, remote management over VPN
- 05 · System Secure cloud Machine and transformer station analytics Monitoring of maximum reserved capacity

On site

## Photos from the project

5 shots straight from the installation.

## Project summary

- Existing infrastructure
- Modbus RTU
- Configuration and data collection

The project focused on installing and configuring a communication interface and then connecting the existing infrastructure to the network. For most devices we chose the Modbus protocol with an RS485 RTU physical layer, which let us create a line network topology. Some specific meters, however, needed a more careful approach and an adjusted communication strategy. In two cases, in the transformer station, we therefore replaced older Schneider devices with new analysers from the same manufacturer and connected them to the network over Ethernet.

## Implementation

- Successful data collection
- Data visualisation
- Consumption and reserved capacity (MRK) evaluation

The installation also included an edge device that aggregates and stores the data for further processing. Together with a partner company responsible for visualisation and analytics, we send this data to a secure cloud, where complete analytics track the consumption of individual machines and transformer stations and the behaviour of process units. The device was successfully connected to the company network, with remote management over VPN available in case of problems with the bus or the edge device.

## Results

- 800 m communication line
- 25 devices connected online
- 28 electrical devices installed
- Electricity consumption metering in the transformer station

A notable feature of the project was connecting and networking devices in two halls, with a communication line more than 800 metres long and as many as 25 devices connected. During the installation, we also had to deal with difficult conditions caused by electromagnetic noise from the operation of various machinery. When measuring the signal with an oscilloscope, we found induced voltage and ran into signal reflection, which we eliminated by fitting suitable termination resistors.

Industry and manufacturing

## More projects in the segment

[Next project: Integrating push buttons into SCADA](https://www.nidextechnology.com/en/references/industry/integracia-tlacidiel-do-scada)

[Industry and manufacturing Sub-metering of machinery in mechanical engineering II Tsubaki Nakashima · mechanical engineering 54 pts · 84 pcs](https://www.nidextechnology.com/en/references/industry/podruzne-meranie-technologii-v-strojarskom-priemysle-ii) [Industry and manufacturing Electricity monitoring in the furniture industry Ekoltech · furniture manufacturer, Fiľakovo 28 pts · 15 pcs](https://www.nidextechnology.com/en/references/industry/monitoring-elektrickej-energie-v-nabytkarskom-priemysle) [Industry and manufacturing Sub-metering of machinery in mechanical engineering Tsubaki Nakashima · mechanical engineering 79 pts · 109 pcs](https://www.nidextechnology.com/en/references/industry/podruzne-meranie-technologii-v-strojarskom-priemysle)

[All projects in Industry and manufacturing](https://www.nidextechnology.com/en/references/industry#projekty)

Continue to another segment

Contact

## Want a similar result at your site?

We start with a site visit and a no-obligation quote. A pilot project on one building proves the benefit before you decide on full deployment.

- [No-obligation consultation](https://cal.com/nidextechnology/consultation)

Write to us

[office@ nidextechnology.com](mailto:office@nidextechnology.com?subject=No-obligation%20consultation)

For clients and partners

- Mgr. Denis Hriň Co-founder [hrin@ nidextechnology.com](mailto:hrin@nidextechnology.com) [+421 905 134 635](tel:+421905134635)
- Ing. Nicolas Hečko Co-founder [hecko@ nidextechnology.com](mailto:hecko@nidextechnology.com) [+421 904 418 299](tel:+421904418299)

**Nidex Technology s.r.o.** Novozámocká 55/58, 949 05 Nitra, Slovakia

- [LinkedIn](https://www.linkedin.com/company/nidextechnology/)
- [Facebook](https://www.facebook.com/Nidextechnology)
- [Instagram](https://www.instagram.com/nidextechnology/)
