---
title: "Industry and manufacturing: case study and references | Nidex Technology"
url: https://www.nidextechnology.com/en/references/industry
language: en
---

Case study · Industry and manufacturing

# How to save an industrial company €81,000 a year on energy, penalties and power factor

Taplast, a manufacturer of plastic packaging and dispensing closures for the cosmetics, household and food industries, had meters installed on site, but they were not networked. Nobody read or evaluated the data. The company decided to gain a real overview of its plants’ energy use and turn it into savings.

Project result

€81,000 / year

Total annual savings identified

Client

Taplast, manufacturer of plastic packaging and dispensing closures

Sector

Plastics industry, consumer packaging

Location

Levice, industrial park

Utility

Electricity: production lines, transformer stations, halls

Technology

Modbus RTU / RS485, Ethernet, edge, VPN, cloud

Starting point

## We understand the segment's challenges

Where costs and risks really arise in this environment, and why you cannot see them without metering.

01

### Existing infrastructure, no data

The plant had meters installed, but they were not networked. The data was neither read nor evaluated.

02

### Reliable industrial communication

Communication lines across large production halls need careful topology design and signal verification. Without them, data collection drops out.

03

### Exceeding reserved capacity (MRK/RK)

MRK/RK is the maximum reserved capacity. Without active monitoring, power peaks mean automatic penalties from the distribution system operator, discovered only on the invoice.

04

### Machine consumption out of sight

The energy use of individual machines and transformer stations was unknown. You cannot manage what you do not measure.

Project scope

## What we deployed on the project

- 800 m communication line across two production halls
- 25 metering devices connected online
- 28 electrical devices installed in total
- Replacement of the original network analysers in the transformer station
- Edge device, VPN remote management, cloud analytics, AI reporting, AI prediction and maintenance

From the project: switch room and transformer station, Taplast Levice

How it is connected

## Solution diagram

Simplified diagram based on the project description.

- 01 · Metering Existing meters and new analysers in the transformer station Electricity **25** metering points **28** devices installed
- 02 · Transfer Modbus RS485 RTU, 800 m line · Ethernet **800 m** communication line length
- 03 · Data collection Edge device
- 04 · Network Company network, remote management over VPN
- 05 · System Secure cloud Machine and transformer station analytics Monitoring of maximum reserved capacity

Results · real data from the deployment

## Measurable impact

The figures come straight from the deployed monitoring and analytics system.

€81,000

€25,000

More efficient energy contracts

€20,000

Poor power factor detected

€12,000

Reserved capacity penalties prevented

Annual savings by area Savings identified after the monitoring and analytics system went live.

- Preventing penalties and overloads (MRK/RK) €12,000
- Detecting an inefficient power factor €20,000
- Optimising production planning and costs €15,000
- Employee accountability and transparency €9,000
- More efficient energy contract settings €25,000

Total annual savings identified **€81,000**

Concrete benefits · real findings

## What the system delivered in practice

### Correcting an inefficient power factor: €20,000/year

Monitoring revealed a persistently low power factor. After correction, the system eliminated the distribution operator’s surcharges for reactive power. Savings identified: about €20,000 a year.

### Preventing reserved capacity penalties: €12,000/year

Automatic monitoring of demand peaks gives a warning before the reserved capacity is exceeded. The penalties avoided amount to about €12,000 a year.

Your challenges · our answers

## What it means for a manufacturing company

Existing meters without a network connection

Networked over Modbus RTU, data available online immediately

Long communication lines across halls with no guarantee of reliability

Expert topology design, signal verification, stable data collection

Consumption by machine and transformer station out of sight

Metering at every supply point, live dashboard

Risk of penalties for exceeding reserved capacity (MRK/RK)

Automatic tariff monitoring, a warning before the limit is exceeded

Why Nidex Technology

## Four reasons, each proven in practice

### End-to-end responsibility

From design, hardware supply and installation to data integration, inspections and support. One supplier, one point of responsibility.

### Technical precision and standards

We design in line with the Slovak standards STN 33 2000 and STN EN 61439. We issue statutory inspection and test reports (OPOS) with our own staff.

### References in regulated environments

Healthcare, industry, state infrastructure: environments with higher demands on accuracy and reliability.

### Based in Central Europe

We are based in Nitra, Slovakia, about two hours from Vienna and Budapest, and know the local legislation. Fast response, one team from design to service.

Proposed next steps

## Three steps from a meeting to the first results

- 01 Technical meeting A visit to the selected building. We define the scope, priority locations and constraints.
- 02 Indicative quote An indicative price based on the agreed scope. Presentation of the technical design.
- 03 Pilot project Deployment in one building. Verifying functionality, integration and training the operators.

Conclusion

## Why it makes sense

Deploying the monitoring and analytics system brought Taplast identified annual savings of €81,000: in preventing penalties, correcting the power factor, optimising production and setting up energy contracts. What used to be invisible is now measured, managed and reflected in costs. Networking the existing infrastructure proved to be an investment with a quick payback.

**Want to see the real consumption of your operation?** We start with a site visit and a no-obligation quote. A pilot project on one building proves the benefit before you decide on full deployment.

[Projects in Industry and manufacturing](https://www.nidextechnology.com/en/references/industry#projekty) [Solution for industry and manufacturing](https://www.nidextechnology.com/en/smart-metering/industry)

Industry and manufacturing

## Projects in the segment · 7

[Industry and manufacturing Sub-metering of machinery in mechanical engineering II Tsubaki Nakashima · mechanical engineering 54 pts · 84 pcs](https://www.nidextechnology.com/en/references/industry/podruzne-meranie-technologii-v-strojarskom-priemysle-ii) [Industry and manufacturing Electricity monitoring in the furniture industry Ekoltech · furniture manufacturer, Fiľakovo 28 pts · 15 pcs](https://www.nidextechnology.com/en/references/industry/monitoring-elektrickej-energie-v-nabytkarskom-priemysle) [Industry and manufacturing Sub-metering of machinery in mechanical engineering Tsubaki Nakashima · mechanical engineering 79 pts · 109 pcs](https://www.nidextechnology.com/en/references/industry/podruzne-meranie-technologii-v-strojarskom-priemysle) [Industry and manufacturing Energy monitoring integration Vegum · rubber industry 40 pts · 45 pcs](https://www.nidextechnology.com/en/references/industry/integracia-energetickeho-monitoringu) [Case study Industry and manufacturing Networking existing meters Taplast · plastics industry 25 pts · 28 pcs](https://www.nidextechnology.com/en/references/industry/zosietovanie-existujucich-meracov) [Industry and manufacturing Integrating push buttons into SCADA Boge · mechanical engineering and energy industry Integrating and programming push buttons in SCADA](https://www.nidextechnology.com/en/references/industry/integracia-tlacidiel-do-scada) [Industry and manufacturing Electrical design in industry Battery industry Electrical design](https://www.nidextechnology.com/en/references/industry/elektroprojektovanie-v-automatizacii)

Continue to another segment

Contact

## Want a similar result at your site?

We start with a site visit and a no-obligation quote. A pilot project on one building proves the benefit before you decide on full deployment.

- [No-obligation consultation](https://cal.com/nidextechnology/consultation)

Write to us

[office@ nidextechnology.com](mailto:office@nidextechnology.com?subject=No-obligation%20consultation)

For clients and partners

- Mgr. Denis Hriň Co-founder [hrin@ nidextechnology.com](mailto:hrin@nidextechnology.com) [+421 905 134 635](tel:+421905134635)
- Ing. Nicolas Hečko Co-founder [hecko@ nidextechnology.com](mailto:hecko@nidextechnology.com) [+421 904 418 299](tel:+421904418299)

**Nidex Technology s.r.o.** Novozámocká 55/58, 949 05 Nitra, Slovakia

- [LinkedIn](https://www.linkedin.com/company/nidextechnology/)
- [Facebook](https://www.facebook.com/Nidextechnology)
- [Instagram](https://www.instagram.com/nidextechnology/)
